G

Greenlight Surf Supply

Greenlight "Essentials" Surfboard Shaping Tool Pack

Get the top 7 most popular Greenlight Engineered Tools in a discounted package! You can add a Futures Fin Box or FCS2 Fin Box Install Kit too! Includes: Rasputin Foiling Rasp (24") The 'Rasputin' Foiling Rasp is a 24" x 4" wide surfboard shaping rasp studded with gnarly 16 grit carbide chips to effortlessly remove foam and wood from your blank for leveling and foiling your shape. Use on EPS and Polyurethane blanks. G-rasp (12") The G-Rasp is a 12" x 4" wide surfboard shaping rasp embedded with an aggressive array of 16 grit carbide chips to effortlessly remove foam from your blank 3X more efficiently than a surform or sanding block. Use for cutting and fine tuning rail bands, removing planer marks on the deck and bottom, and dialing in foil and bottom contours. Clog-free design suitable for both EPS and Polyurethane blanks. Rail Runner Tool The Rail Runner Tool quickly squares up your surfboard outline cut, eliminating bumps and dips -which is essential to a symmetrical, clean shape. Even more, just flip the magnetic handle to the other side and the Rail Runner becomes a 'Fred Tool' for cutting in the bottom rail 'tuck' band - perfect tuck and consistent bottom rail / water interaction on every board you shape. For use with EPS and Polyurethane foam blanks. Note: Not for heavy use on stringers or on the hard outer skin of PU blanks - This is a tool for shaping Foam! G-Square Surfboard Fin and Outline Layout Measuring Tool The G-square is simplest and most intuitive way to measure and lay out surfboard fin positions including distance from the tail, distance in from the rail, and fin toe-in angle. Just pencil mark your fin position "shaper's dot" coordinates up from the tail and in from the rail on the bottom of the G-square and simply subtract the toe-in measurement from the top of the G-square and place a dot to set the angle. Position your finbox install router jig on the dots and route away! Standard fin toe-in measurements: 1/4" toe-in for the front fins in a tr